ESAB Migmaster 173 MIG Welder
#0558005173
Industrial Ready-to-Weld MIG Package
The Migmaster® 173 is the ideal welding machine
for every light industrial shop
that wants rugged, simple equipment and high
quality results. The Migmaster®
is a step-regulated welding power source
designed for light-duty applications.
With a built-in wire feeder, it is the perfect,
practical solution for fabricators,
vehicle repair shops and light production users.
Features
PSD™ Technology – excellent welding performance
for a single phase machine.
The PSD™ (Power Smoothing Device™) produces a
smooth 3-phase type arc, in a
1-phase power source. The Migmater® has
excellent arc characteristics when MIG
welding with either CO2 or Argon/CO2 shielding
gas. The units are each equipped
with a multi-step voltage switch and wire speed
control for easy setting of
welding parameters. Units are fan-cooled and
equipped with thermal overload
protection.
MIG or FCAW - Easy to change polarity
makes it simple to switch between
MIG solid wires and self-shielded flux cored
wires. The Migmaster® is designed
to weld steel, stainless steel and aluminum.
Easy to set welding parameters
Built-in Spot Timer – Standard
Built-in Burn back control –
Standard
ESAB MX™ MIG Gun – Features enhanced
gas-cooling for extended life.
The gun handle has a new ergonomic design.
Spring loaded contact pins in the
central connector eliminate any possibility of
pin misalignment.
Optional Digital Meter Kit - Field
installed digital meter kit for more
precise welding parameter control.
SPECIFICATIONS
- Input Voltage – 208/230 Vac, 1ph 50/60 Hz
- Welding Output – 170 Amps @ 20% duty cycle
- Wire Feed Speed – 39-670 IPM
- Voltage Steps – 8
- Dimensions – 34”L X 17”W X 29”H
- Weight – 130 lb.
Comes Complete With
- .023-.030 drive roll
- 10 ft. MXL 200 MIG Gun
- 10 ft. work cable with clamp
- 10 ft. primary input power cable with plug
- R-33 regulator/flowmeter with 5 ft. gas hose
- Undercarriage, cylinder rack with chain
- Instruction manual
|
