Mig Welders, Lincoln Mig Welders, Miller Mig Welders

MultiMaster 260 - 15’, 230-575vac 1phase 50/60Hz Argon/MT-250SG Spoolgun
Industrial Ready-To-Weld Multi-Process Package

Advanced SuperSwitchTM technology makes multiprocess welding a breeze. Simplified setup makes it easy to select Mig, Tig, or Stick.
DC welding output from 15 to 300 amps; rated 260 amps at 50% duty cycle
Output Pre-Set Capability for Quick Set-Up
Two Digital Meters for Easy Fine Tuning
Heavy Duty Four Drive Roll Stand
Convenient, Large Capacity Built-In Tool Box
Dual “Easy-On” Cylinder Tray
Pulse Mig Capability with optional module

Specifications
Rated DCCV or DCCC Output (10 min base)
-50% duty cycle (NEMA Class I) ................ 260 amps @ 27 vdc
Output Current Range
-Mig (GMAW) .................................................. .......... 35-300 amps
-Tig (GTAW) .................................................. ............ 10-300 amps
-Stick (SMAW) .................................................. ......... 40-300 amps
Open Circuit Voltage
-Mig (MGAW) .................................................. ..................... 70 vdc
-Tig (TGAW) .................................................. ....................... 20 vdc
-Stick (SMAW) .................................................. .................... 70 vdc
Primary Input Voltage & Current @ 260 amp rated load
-208/230 vac, 60 Hz, 1 ph ...................................... 57/52 amps
Wire Feed Range ................................ 65-675 ipm (1.6 - 17.3 m/min)
Net Weight .................................................. .......... 250 lbs. (112.5 kg)
Shipping Weight .................................................. 290 lbs. (130.5 kg)
W x L x H ...... 25.3 in. (64 cm) x 39.5 in. (100 cm) x 33.5 in. (85 cm)

Multimaster 260 cvcc Multi-Process Packages
Each of the following packages are set ready to run .035/.045 diameter wire. Packages include:
- Power source with built-in four roll wire feeder
- Factory installed undercarriage & cylinder rack
- Gun Master 250 Amp "NAS" Mig Torch
- Gas regulator/flowmeter with hose
- Work cable & clamp
- Primary input cable
- Mig Welding Handbook
- 10# sample of .035 86HP III Wire and 5# sample Stick Electrodes.
- See back page for options and accesories.

MultiMaster 260, w/GM-250 “NAS” torch
MultiMaster 260 - 12’, 230-575vac 1phase 50/60Hz Argon/MT-250SG ............0558001768